We would be delighted to be your partner
Do you have any questions? Would you like some advice? Is there a specific problem? Then get in touch: we have a solution!
A rotary actuator is a compact swivel actuator designed to convert linear piston movement into a defined rotary motion.
Power is transmitted via:
• piston movement
• rack
• pinion shaft
The DSO is available in various versions:
DSO-P – Pneumatic version
• Operated by compressed air
DSO-H – Hydraulic version
• Operated by hydraulic oil
DSO-HPE – Hydropneumatic version
• Compressed air as the power source
• Hydraulic system for motion control
The following rotation angles are available as standard:
• 45°
• 90°
• 180°
• 270°
• 360°
• Multiple rotations exceeding 720°
Special angles can be customised to meet specific customer requirements.
The following are also available:
• Multi-position actuators
A travel limit allows the maximum possible angle of rotation to be set mechanically.
Example:
A DSO with a 90° angle of rotation can be mechanically limited to a smaller angle, e.g. 60°.
Advantages:
• precise adaptation to the application
• simple mechanical adjustment
The required torque depends on several factors:
• Weight of the load being moved
• Lever arm or distance from the axis of rotation
• Frictional forces
• Acceleration forces
• Speed
• External forces
• Mounting position
Series Piston diameter
DSO-50 50 mm
DSO-63 63 mm
DSO-80 80 mm
DSO-100 100 mm
DSO-125 125 mm
DSO-160 160 mm
DSO-200 200 mm
DSO-P refers to the pneumatic version of the DSO rotary actuator.
The rotary motion is produced by alternately supplying compressed air to the two cylinder chambers.
The maximum operating pressure is:
10 bar
The DSO-P is particularly suitable for:
• rapid swivelling movements
• heavy-duty industrial applications
• applications with an existing compressed air supply
• easy installation
• low running costs
• short response times
Typical applications:
• Automation technology
• Damper and valve actuation
• Handling systems
• Mechanical engineering
• Swivel mechanisms
DSO-H refers to the hydraulic version of the DSO rotary actuator.
Movement is achieved by alternately pressurising the two cylinder chambers with hydraulic oil.
The hydraulic system enables:
• very smooth movements
• finely adjustable speed
• high power transmission
• high dynamic response to load changes
• controlled motion sequences
Yes. The connection layout can be adapted to the specific installation situation. The speed is adjusted via separate throttle check valves in the hydraulic lines.
This allows:
• both directions of rotation to be controlled independently
• acceleration and deceleration to be adjusted
Typical applications:
• High-load machinery
• Slow swivelling movements
• Precise motion sequences
• Applications involving varying forces
• Heavy-duty applications
The DSO-HPE combines:
• a simple compressed air power supply
• controlled movement of a hydraulic system
This results in a particularly smooth and precise swivelling motion.
The DSO-HPE enables:
• constant angular velocity
• precise control
• smooth movements
• controlled acceleration
• controlled deceleration
• high repeatability
The DSO-HPE features a closed hydropneumatic system.
Features:
• integrated hydraulic control
• automatic leakage oil compensation
• finely adjustable angular velocity
• hydraulic progressive damping
Pressure compensation counteracts changes in the volume of the hydraulic oil caused by temperature changes.
It compensates for:
• thermal expansion of the hydraulic oil
• minor internal leaks
• changes in volume during operation
This ensures that the system continues to function stably.
Standard version:
DSO-P / DSO-H:
• -10 °C to +80 °C
DSO-HPE:
• +15 °C to +80 °C
Special versions for other temperature ranges are available.
Available versions:
• Standard pinion shaft
• Solid pinion shaft
• Hollow pinion shaft
• Hollow shaft
Available options:
• Stroke limitation
• Shift pin for mechanical feedback
• Magnetic piston for non-contact position detection
• Special corrosion protection
• ATEX version
• Special connections
• Customised modifications
Yes.
DSO rotary actuators can be supplied with ATEX certification for potentially explosive atmospheres.
Depending on the design, positioning can be achieved via:
• mechanical indexing pins
• magnetic pistons with proximity switches
• external displacement or angle sensors
Yes.
DSO rotary actuators can be adapted to meet customer-specific requirements, for example:
• Torque
• Angle of rotation
• Speed
• Shaft profile
• Installation configuration
• Environmental conditions
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Turnstile. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from reCAPTCHA. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information